{"id":284,"date":"2026-08-18T05:03:28","date_gmt":"2026-08-18T05:03:28","guid":{"rendered":"https:\/\/www.fullarchmasters.com\/articles\/dental-lab-technician-photogrammetry-course"},"modified":"2026-08-18T05:03:28","modified_gmt":"2026-08-18T05:03:28","slug":"dental-lab-technician-photogrammetry-course","status":"publish","type":"post","link":"https:\/\/www.fullarchmasters.com\/articles\/dental-lab-technician-photogrammetry-course","title":{"rendered":"Photogrammetry Course for Dental Lab Technicians"},"content":{"rendered":"<p><em>Written by: Ryan Dunlop, CEO and Founder of Full Arch Masters and graduate from the Harvard School of Dental Medicine<\/em><\/p>\n<h2 id=\"key-takeaways\">Key Takeaways for Lab-Focused Photogrammetry Training<\/h2>\n<ul>\n<li>Photogrammetry now sits at the center of full-arch implant workflows, yet most training still focuses on dentists and ignores lab CAD and finishing.<\/li>\n<li>Lab technicians need core competencies such as importing photogrammetry files into exocad, merging implant data with soft-tissue scans, and confirming passive fit before production.<\/li>\n<li>The FAM seven-step workflow weaves photogrammetry through preoperative records, immediate-load design, and final zirconia, so technicians follow one repeatable sequence on every case.<\/li>\n<li>Strong training programs address clinical feasibility, workflow efficiency, team alignment, technology needs, financial impact, and post-course support.<\/li>\n<li><a href=\"https:\/\/www.fullarchmasters.com\/\" target=\"_blank\"><strong>Register for an upcoming Full Arch Masters course<\/strong><\/a> to learn the complete seven-step FAM workflow alongside the clinical team you support.<\/li>\n<\/ul>\n<h2>Photogrammetry Basics for Full-Arch Lab Workflows<\/h2>\n<p>Photogrammetry is a measurement technique that calculates precise 3D implant positions by photographing coded markers, mounted on scan bodies placed at each implant, from multiple angles simultaneously. In full-arch implant dentistry, it solves a specific accuracy problem. A 2026 systematic review in the <em>Journal of Prosthetic Dentistry<\/em> found that photogrammetry systems can show better trueness than intraoral scanners for capturing 3D implant positions in complete-arch cases.<\/p>\n<p>For lab technicians, photogrammetry data forms the foundation for passive-fit prosthesis design. Lab-side photogrammetry competency requires mastering these core skills:<\/p>\n<ol>\n<li>Interpreting and importing photogrammetry output files into exocad<\/li>\n<li>Merging photogrammetry implant-position data with intraoral soft-tissue scans<\/li>\n<li>Aligning landmarks and stitching scans for pre- and post-surgical models<\/li>\n<li>Verifying screw-channel exit angles and common insertion paths in exocad<\/li>\n<li>Designing immediate-load PMMA provisionals from photogrammetry records<\/li>\n<li>Troubleshooting passive-fit discrepancies before milling or printing<\/li>\n<li>Completing final zirconia design, green-stage contouring, and aesthetic finishing<\/li>\n<\/ol>\n<h2>The Seven-Step FAM Workflow for Full-Arch Cases<\/h2>\n<p>The FAM Method, Full Arch Masters\u2019 proprietary digital workflow, integrates photogrammetry into a seven-step sequence that runs from the patient\u2019s first appointment through final prosthesis delivery. Each step generates data the lab technician must receive, process, or produce, so the workflow connects directly to daily lab tasks.<\/p>\n<ol>\n<li><strong>Preoperative records and data acquisition.<\/strong> Facial scans, intraoral scans, CBCT, and occlusal records create the baseline dataset. Lab technicians use these records in exocad to build digital mockups and surgical alignment devices before the patient enters surgery.<\/li>\n<li><strong>Photogrammetry and intraoral scanning.<\/strong> On surgery day, photogrammetry captures implant positions with <a href=\"https:\/\/imetric4d.com\/dental-photogrammetry-explained-how-it-works-in-modern-implant-dentistry\" target=\"_blank\" rel=\"noindex nofollow\">micron-level precision, and systems such as the ICam4D perform 60,800 calculations per case<\/a>. A companion intraoral scan records soft tissue, gingival contours, and emergence profiles. The lab merges these two datasets before CAD design begins.<\/li>\n<li><strong>CBCT and digital treatment planning.<\/strong> CBCT data drives implant position planning in exoplan. Lab technicians use the treatment plan to anticipate screw-channel trajectories and prosthetic space before the case reaches surgery.<\/li>\n<li><strong>exocad design.<\/strong> With merged photogrammetry and soft-tissue data imported into exocad DentalCAD, the technician positions implants and multi-unit abutments, verifies parallelism and screw-channel exit angles, designs the framework or bridge on Ti-Base, and models gingival contours and tooth anatomy using exocad\u2019s anatomy libraries. They then check occlusion via virtual articulator and export split files for milling and printing. <a href=\"https:\/\/exoinstall.com\/en\/blog\/all-on-x-v-exocad\" target=\"_blank\" rel=\"noindex nofollow\">exocad version 3.3 Chemnitz (October 2025) enables single-step positioning of all implants in an arch and adds AI multi-unit design assistance<\/a>, which speeds this stage significantly.<\/li>\n<li><strong>Immediate-load conversion.<\/strong> The lab designs and prints a PMMA immediate-load prosthesis from the photogrammetry dataset. A photogrammetry-driven lab workflow removes the need for verification jigs and chairside conversion, allowing direct printing of immediate restorations for same-day delivery.<\/li>\n<li><strong>Final zirconia design and finishing.<\/strong> After osseointegration, the lab designs the definitive zirconia restoration. Finishing includes pre-sintered green-stage contouring, post-sintered surface work, and MIYO ceramic layering for aesthetic characterization.<\/li>\n<li><strong>FP1-specific design and workflow scaling.<\/strong> FP1 prosthetics differ from FP2 and FP3 in root banking, case selection, and lab design approach. Lab technicians supporting FP1 cases need dedicated design instruction. Workflow scaling, which systematizes handoffs between clinical and lab teams, determines whether a practice can run multiple arches per week without friction.<\/li>\n<\/ol>\n<h2>How to Evaluate Photogrammetry Training for Labs<\/h2>\n<h3>Clinical Feasibility<\/h3>\n<p>Training must match the cases a lab technician will actually receive. In 2026, modern full-arch scanning systems can achieve strong trueness, and intraoral photogrammetry systems are narrowing the historical gap with dedicated extraoral systems. Because both system types now deliver clinically viable results, practices are adopting different solutions based on workflow and budget. A training program that teaches only one system type leaves technicians unprepared for the range of data formats arriving from clinical partners.<\/p>\n<h3>Workflow Efficiency<\/h3>\n<p>A fully digital intraoral photogrammetry workflow can streamline the full-arch implant process by capturing implant positions and surrounding soft tissue data in a single scan. This approach removes separate device switching and data merging that extraoral systems require. Lab technicians trained on integrated workflows process cases faster and with fewer alignment errors.<\/p>\n<h3>Team Readiness<\/h3>\n<p>Lab-side photogrammetry training works best when the clinical team and lab team train on the same workflow at the same time. Misaligned handoff protocols, such as different scan formats, inconsistent landmark preservation, and unclear file-naming conventions, create the most common passive-fit troubleshooting calls after a case enters production.<\/p>\n<h3>Technology Requirements<\/h3>\n<p><a href=\"https:\/\/exoinstall.com\/en\/blog\/all-on-x-v-exocad\" target=\"_blank\" rel=\"noindex nofollow\">For comfortable All-on-X modeling in exocad, technicians need a high-performance computer with sufficient RAM, a dedicated GPU, and fast storage<\/a>. Training programs that use exocad should confirm that workstations meet recommended specifications and that the Implant Module is enabled.<\/p>\n<h3>Financial Implications<\/h3>\n<p>Photogrammetry systems span a wide cost range, from entry-level options to dedicated extraoral systems. Training programs should explain the cost-benefit profile of each system type so lab technicians can advise the practices they support on equipment decisions.<\/p>\n<h3>Post-Course Support<\/h3>\n<p>Photogrammetry troubleshooting is case-specific. A training program that ends when the course ends leaves technicians without help when a passive-fit issue appears on a live case. Ongoing community access, where peers who have processed hundreds of photogrammetry cases respond in real time, functions as a structural differentiator rather than a bonus feature.<\/p>\n<h2>Side-by-Side Comparison of Full Arch Masters Lab Courses<\/h2>\n<p>Full Arch Masters offers multiple course tracks for lab technicians. The Design and Finish Course is the dedicated lab track, while the FP1 Course and Flagship Course provide complementary instruction for technicians supporting specific case types or in-house lab workflows.<\/p>\n<figure style=\"text-align: center\"><img decoding=\"async\" src=\"https:\/\/cdn.aigrowthmarketer.co\/1780622299367-de24ca533522.jpeg\" alt=\"Full Arch Master&apos;s Flagship Course\" style=\"max-height: 500px\" loading=\"lazy\"><figcaption><em>Full Arch Master&#8217;s Flagship Course<\/em><\/figcaption><\/figure>\n<table>\n<thead>\n<tr>\n<th>Course<\/th>\n<th>Lab Focus<\/th>\n<th>exocad Instruction<\/th>\n<th>Finishing Modules<\/th>\n<th>Post-Course Support<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Design and Finish Course<\/td>\n<td>Dedicated lab track, four days of design and finishing with beginner and advanced tracks calibrated by skill level<\/td>\n<td>Two full days covering preop records, digital mockups, surgical record imports, immediate-load prosthetics, and final zirconia design, with exocad Implant Module used throughout<\/td>\n<td>Two full days on pre-sintered and post-sintered zirconia, green-stage contouring, MIYO ceramic layering, plus PMMA, PEEK, metallic frameworks, and crystal-based materials<\/td>\n<td>Alumni group chats with a lab-focused channel, KOL buying group access at no recurring cost, and a digital resource library<\/td>\n<\/tr>\n<tr>\n<td>FP1 Course<\/td>\n<td>Lab attendees receive FP1-specific digital design instruction in a two-day format<\/td>\n<td>FP1-specific design steps in exocad that differ from FP2 and FP3 workflows in root banking and prosthetic space management<\/td>\n<td>FP1 finishing overview integrated with the design day<\/td>\n<td>Alumni group chats and KOL buying group access at no recurring cost<\/td>\n<\/tr>\n<tr>\n<td>Flagship Course<\/td>\n<td>Lab technicians attend alongside the dentist they support, with clinical-lab alignment as the primary lab benefit<\/td>\n<td>Lab-side exocad context within the full FAM seven-step workflow rather than a standalone design deep-dive<\/td>\n<td>Overview-level finishing content, while the Design and Finish Course serves as the dedicated finishing track<\/td>\n<td>Alumni group chats in the main multi-role channel, KOL buying group access at no recurring cost, and a digital resource library<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>The Design and Finish Course is priced at $6,995. The FP1 Course costs $1,495 for lab technicians and assistants. Flagship team-member pricing is $2,500 per additional team member when they attend with the practice dentist.<\/p>\n<figure style=\"text-align: center\"><img decoding=\"async\" src=\"https:\/\/cdn.aigrowthmarketer.co\/1780622324508-aaf82b36541a.jpeg\" alt=\"Full Arch Master&apos;s Flagship Course\" style=\"max-height: 500px\" loading=\"lazy\"><figcaption><em>Full Arch Master&#8217;s Flagship Course<\/em><\/figcaption><\/figure>\n<h2>What Is Photogrammetry Used for in Dentistry?<\/h2>\n<p>In full-arch implant dentistry, photogrammetry serves the passive-fit function described earlier by capturing precise 3D implant positions simultaneously, eliminating reliance on stitched intraoral scans that can introduce cumulative error across a full arch. <a href=\"https:\/\/imetric4d.com\/dental-photogrammetry-explained-how-it-works-in-modern-implant-dentistry\" target=\"_blank\" rel=\"noindex nofollow\">Clinicians seek a high degree of passive fit in full-arch implant restorations<\/a>, and intraoral scanners can produce notable discrepancy across a full arch, which can exceed acceptable thresholds.<\/p>\n<p>For lab technicians, photogrammetry data supports three specific tasks:<\/p>\n<ul>\n<li><strong>Scan merging:<\/strong> Photogrammetry files capture implant positions only. A separate intraoral scan of soft tissue and healing abutments is required to orient the data before final prosthesis design. The lab merges these two datasets in exocad using preserved landmarks such as remaining teeth, keratinized tissue, and retro-molar pads as alignment references.<\/li>\n<li><strong>Immediate-load design:<\/strong> Photogrammetry data enables same-day provisional design with higher confidence because implant positions are mathematically measured rather than estimated from a stitched scan.<\/li>\n<li><strong>Passive-fit verification:<\/strong> Before milling or printing, technicians use the merged dataset to verify that the prosthesis framework seats without stress across all implant connections. This step catches fit errors before they become chairside problems.<\/li>\n<\/ul>\n<h2>Choosing a Dental Photogrammetry System in 2026<\/h2>\n<p>No single system fits every practice or lab configuration. The 2026 landscape has expanded significantly. The photogrammetry market for All-on-X scanning now includes dedicated extraoral systems, intraoral photogrammetry handpieces, and horizontal scan body kits.<\/p>\n<p>Research has evaluated the trueness of different photogrammetry systems.<\/p>\n<p>For lab technicians, the system question matters less than the workflow question. Whatever system the clinical team uses, the lab must receive the output, merge it with soft-tissue data, and design to it in exocad. Training that covers the merge and design steps, not just the capture device, determines lab-side competency. Full Arch Masters uses the Imetric4D iCam system in its workflow, and alumni receive KOL buying group pricing on iCam systems through the Neodent partnership at no recurring cost.<\/p>\n<h2>Will AI Replace Lab Technicians?<\/h2>\n<p>AI tools now accelerate specific steps in the full-arch lab workflow. <a href=\"https:\/\/exoinstall.com\/en\/blog\/all-on-x-v-exocad\" target=\"_blank\" rel=\"noindex nofollow\">exocad 3.3 Chemnitz introduced AI multi-unit design assistance for All-on-X cases<\/a>, yet these tools do not replace the judgment that determines whether a case succeeds. Human expertise remains essential in several areas.<\/p>\n<ul>\n<li>Passive-fit troubleshooting when merged datasets contain alignment errors<\/li>\n<li>Landmark selection for scan stitching in edentulous or partially edentulous arches<\/li>\n<li>Green-stage contouring and MIYO ceramic layering for aesthetic characterization<\/li>\n<li>FP1-specific design decisions involving root banking and prosthetic space management<\/li>\n<li>Clinical-lab communication when a case deviates from the planned workflow<\/li>\n<\/ul>\n<p><a href=\"https:\/\/research-repository.uwa.edu.au\/en\/publications\/guidelines-for-digital-interocclusal-records-part-1-dentate-and-p\" target=\"_blank\" rel=\"noindex nofollow\">Hendawi et al. (2026) note that accuracy of digital interocclusal records declines with increasing edentulous span<\/a>, and verification through occlusal heat maps, articulating paper, or printed prototypes still matters before definitive prosthesis design. AI-assisted alignment tools can introduce algorithmic artefacts that require human review. The technician who understands why a passive-fit check matters, and how to respond when it fails, is not a candidate for automation.<\/p>\n<p><a href=\"https:\/\/www.fullarchmasters.com\/\" target=\"_blank\"><strong>Register for an upcoming Full Arch Masters course<\/strong><\/a> and build the troubleshooting skills that AI tools cannot replicate.<\/p>\n<h2>Online vs Hands-On Photogrammetry Training for Labs<\/h2>\n<p>Both online and hands-on formats belong in a lab technician\u2019s continuing education plan. The right choice depends on which skills gap the technician needs to close first.<\/p>\n<table>\n<thead>\n<tr>\n<th>Format<\/th>\n<th>Strengths<\/th>\n<th>Limitations<\/th>\n<th>Best For<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Online \/ on-demand<\/td>\n<td>Low cost, flexible scheduling, strong for conceptual orientation, and some free options with AGD CE credit<\/td>\n<td>No hands-on exocad time, no practice on scan merging or passive-fit troubleshooting with real data, and no peer feedback on design decisions<\/td>\n<td>Technicians new to photogrammetry concepts who need orientation before hands-on training<\/td>\n<\/tr>\n<tr>\n<td>Hands-on \/ in-person<\/td>\n<td>Direct exocad practice on real case data, immediate instructor feedback on merge errors and design decisions, and physical practice of finishing techniques, with a peer community forming during the course<\/td>\n<td>Higher cost, travel requirements, and scheduling constraints<\/td>\n<td>Technicians who must produce photogrammetry-driven full-arch cases independently and troubleshoot passive-fit issues without supervision<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>For lab technicians who need exocad integration, scan merging, and passive-fit troubleshooting skills, hands-on training is the appropriate format. Online courses provide useful orientation but cannot match the feedback loop of working through a merge error in real time with an instructor present.<\/p>\n<h2>Exocad Integration, Scan Merging, and Passive-Fit Checks<\/h2>\n<p>The merge step causes most lab-side passive-fit problems. Preserving landmarks such as remaining teeth, untouched tissue, and healing abutments from the pre-surgical phase allows accurate stitching of pre-surgical digital models to surgical models after implant placement. When landmarks are absent or contaminated by blood, debris, or tissue displacement, the merge produces a misaligned dataset that carries error into every downstream design step.<\/p>\n<p>In exocad, the All-on-X workflow after a successful merge follows these technical checkpoints:<\/p>\n<ul>\n<li>Project setup in DentalDB with supports marked as implants and restoration type selected<\/li>\n<li>Implant and multi-unit abutment positioning with common insertion-path control for screw channels<\/li>\n<li>Screw-channel exit angle verification within acceptable zones<\/li>\n<li>Framework or bridge design on Ti-Base with minimum wall thickness checked for the chosen material<\/li>\n<li>Gingival contour and tooth anatomy modeling using exocad\u2019s anatomy libraries<\/li>\n<li>Occlusion verification via virtual articulator<\/li>\n<li>Output file split for milling and printing in correct production formats<\/li>\n<\/ul>\n<p><a href=\"https:\/\/exoinstall.com\/en\/blog\/all-on-x-v-exocad\" target=\"_blank\" rel=\"noindex nofollow\">Implant and Ti-Base libraries, including 1,058 available at dentallibs.com, must be installed into the DentalCADApp\/library\/implant folder with exocad closed, deleting prior versions to avoid double-nested folders that prevent the system from recognizing the library<\/a>. This setup mistake frequently blocks workflow before design begins.<\/p>\n<p>When passive fit fails at try-in, the troubleshooting sequence returns to the merge. The technician verifies landmark alignment, checks for soft-tissue interference in the intraoral scan, and confirms that the photogrammetry output file was not altered after export. Extraoral photogrammetry produces rigid, non-stitchable implant position data that cannot be altered by operator error once markers are correctly placed. This characteristic means passive-fit failures in photogrammetry-driven cases almost always trace back to the merge or the design step rather than the capture step.<\/p>\n<h2>Course Costs, CE Credits, and Ongoing Support<\/h2>\n<p>The Full Arch Masters Design and Finish Course costs $6,995 for four days of dedicated lab instruction in Fresno, CA. The FP1 Course costs $1,495 for lab technicians. When a lab technician attends the Flagship Course alongside the dentist they support, team-member pricing is $2,500. The FAM Fellowship bundle, which combines the Flagship, Design and Finish, and Live Surgical courses plus a fourth course of the practice\u2019s choice, saves $5,000\u2013$10,000 compared with individual course pricing and includes a payment plan of up to 9\u201312 months.<\/p>\n<p>Full Arch Masters courses are accredited through AGD PACE, with 32 CE credits available per main course. AGD PACE accredits CE provider organizations, and Full Arch Masters holds that accreditation. Credits earned through FAM courses count toward AGD Fellowship and Mastership requirements for dentists and satisfy CE requirements for lab technicians in states that recognize AGD PACE providers.<\/p>\n<p>Post-course support at Full Arch Masters operates through three channels at no recurring cost:<\/p>\n<ul>\n<li><strong>Alumni group chats:<\/strong> Private channels spanning dentists, lab technicians, and team members, including a lab-focused channel, where hundreds of FAM-trained alumni respond to case questions, equipment troubleshooting, and passive-fit issues in real time.<\/li>\n<li><strong>KOL buying group:<\/strong> Alumni receive vendor discounts on Neodent implants, exocad licenses, 3D printers, photogrammetry systems, and other equipment. Full Arch Masters is a certified exocad reseller for DentalCAD, exoplan, and ChairsideCAD. Attendance at one course activates the discount with no recurring fee.<\/li>\n<li><strong>Digital resource library:<\/strong> A reference library covering surgical room setup, finishing techniques, treatment coordinator forms, and consent templates, distributed via shared drive after each course.<\/li>\n<\/ul>\n<h2>Practical Readiness Checklist for Lab Technicians<\/h2>\n<p>This checklist helps a lab technician decide whether they are ready to process photogrammetry-driven full-arch cases independently and which training gaps to address first.<\/p>\n<ul>\n<li>You can import photogrammetry output files into exocad and confirm implant library alignment.<\/li>\n<li>You can merge photogrammetry implant-position data with a companion intraoral soft-tissue scan using preserved landmarks.<\/li>\n<li>You can verify screw-channel exit angles and common insertion paths before framework design.<\/li>\n<li>You can design an immediate-load PMMA provisional from a photogrammetry dataset.<\/li>\n<li>You can perform passive-fit verification in exocad before sending files to mill or print.<\/li>\n<li>You can troubleshoot a merge error and identify whether the failure originated in landmark selection, soft-tissue contamination, or file handling.<\/li>\n<li>You can complete green-stage contouring on pre-sintered zirconia and apply MIYO ceramic layering for aesthetic characterization.<\/li>\n<li>You understand the design differences between FP1, FP2, and FP3 prosthetic classifications.<\/li>\n<li>You have a peer community to contact when a case deviates from the planned workflow.<\/li>\n<\/ul>\n<p>If three or more items on this list remain unchecked, the Design and Finish Course at Full Arch Masters offers the most direct path to closing those gaps. The course covers every item on this list across four days of hands-on instruction in Fresno, CA, with beginner and advanced tracks calibrated to the technician\u2019s current skill level.<\/p>\n<p><a href=\"https:\/\/www.fullarchmasters.com\/\" target=\"_blank\"><strong>Register for an upcoming Full Arch Masters course<\/strong><\/a> and leave with the exocad skills, finishing techniques, and peer community needed to process photogrammetry-driven full-arch cases independently.<\/p>\n<h2>Frequently Asked Questions<\/h2>\n<h3>What is the difference between extraoral and intraoral photogrammetry for lab technicians?<\/h3>\n<p>Extraoral photogrammetry systems use a dedicated camera to photograph coded markers on scan bodies placed at each implant, capturing all positions simultaneously without stitching. The output is a rigid, mathematically precise implant-position file. Intraoral photogrammetry integrates the same coded-marker approach into an intraoral scanner handpiece, capturing implant positions and soft tissue in a single device. For lab technicians, the practical difference appears in the merge workflow. Extraoral systems produce a photogrammetry file that must be merged with a separate intraoral soft-tissue scan in exocad, while intraoral photogrammetry systems deliver a pre-merged dataset. Both formats require the technician to verify landmark alignment and confirm passive fit before milling or printing. Training on both data types, and on the merge step specifically, determines whether a lab technician can handle the full range of cases arriving from clinical partners in 2026.<\/p>\n<h3>How does the Full Arch Masters Design and Finish Course differ from general digital dentistry training?<\/h3>\n<p>Most digital dentistry training programs are designed for dentists and cover scanning, planning, and clinical delivery. The Design and Finish Course focuses exclusively on the lab side of the workflow. The first two days concentrate on digital design in exocad, covering preoperative records, digital mockups, surgical alignment devices, surgical record imports, immediate-load prosthetic design, and final zirconia design using the seven-step FAM workflow sequence. The second two days provide hands-on aesthetic finishing on pre-sintered and post-sintered zirconia, including green-stage contouring and MIYO ceramic layering. Full Arch Masters surveys attendees in advance and separates beginners from advanced designers so each track runs at the appropriate skill level. Lab technicians also join the alumni group chats and KOL buying group at no recurring cost after the course, which provides ongoing case support that general training programs typically do not offer.<\/p>\n<h3>What ongoing support do lab technicians receive after completing a Full Arch Masters course?<\/h3>\n<p>Every Full Arch Masters alumnus, regardless of which course they attend, joins private alumni group chats that include a lab-focused channel where hundreds of FAM-trained technicians, dentists, and team members respond to case questions in real time. This access has no expiration date and no recurring fee. Alumni also receive access to the KOL buying group, which provides vendor discounts on exocad licenses, Neodent implants, 3D printers, and photogrammetry systems. Full Arch Masters is a certified exocad reseller for DentalCAD, exoplan, and ChairsideCAD, so alumni can purchase or upgrade licenses at preferred pricing directly through FAM. The digital resource library, which covers finishing techniques, surgical room setup, and workflow templates, is distributed via shared drive and updated as the FAM Method evolves.<\/p>\n<h3>Can a lab technician attend Full Arch Masters courses without the dentist they support?<\/h3>\n<p>Yes. The Design and Finish Course and the FP1 Course are open to lab technicians attending independently. Both courses deliver complete, standalone value for the lab side of the workflow. Full Arch Masters still recommends that in-house lab technicians attend the Flagship Course alongside the dentist they support, because the FAM Method functions as a team-based workflow, with one team following one workflow. Clinical-lab alignment from day one reduces handoff friction that causes passive-fit problems and case delays. When a lab technician and their clinical partner train on the same seven-step sequence together, the practice can run the workflow at full speed immediately after returning home. Team-member pricing for the Flagship Course is $2,500 per additional attendee when the dentist registers.<\/p>\n<h3>How do 32 AGD PACE CE credits from Full Arch Masters apply to lab technician licensing requirements?<\/h3>\n<p>Full Arch Masters holds AGD PACE accreditation as a CE provider organization, which means CE credits earned through FAM courses are recognized by the American Academy of General Dentistry and by state dental boards that accept AGD PACE providers. CE requirements for lab technicians vary by state. Some states require CE for dental laboratory technician license renewal, while others do not mandate it. Technicians should confirm their state\u2019s specific requirements with their licensing board. For those in states that recognize AGD PACE providers, the 32 CE credits available per main FAM course satisfy a substantial portion of a typical renewal cycle. The FAM Fellowship program delivers more than 90 CE hours across the full curriculum for practices pursuing comprehensive training across all five course tracks.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Master the FAM 7-step full-arch implant workflow with Full Arch Masters \u2014 photogrammetry training designed for dental lab technicians. Enroll now!<\/p>\n","protected":false},"author":119,"featured_media":283,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"inline_featured_image":false,"footnotes":""},"categories":[1],"tags":[],"class_list":["post-284","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-uncategorized"],"_links":{"self":[{"href":"https:\/\/www.fullarchmasters.com\/articles\/wp-json\/wp\/v2\/posts\/284","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.fullarchmasters.com\/articles\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.fullarchmasters.com\/articles\/wp-json\/wp\/v2\/types\/post"}],"replies":[{"embeddable":true,"href":"https:\/\/www.fullarchmasters.com\/articles\/wp-json\/wp\/v2\/comments?post=284"}],"version-history":[{"count":0,"href":"https:\/\/www.fullarchmasters.com\/articles\/wp-json\/wp\/v2\/posts\/284\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.fullarchmasters.com\/articles\/wp-json\/wp\/v2\/media\/283"}],"wp:attachment":[{"href":"https:\/\/www.fullarchmasters.com\/articles\/wp-json\/wp\/v2\/media?parent=284"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.fullarchmasters.com\/articles\/wp-json\/wp\/v2\/categories?post=284"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.fullarchmasters.com\/articles\/wp-json\/wp\/v2\/tags?post=284"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}